• 5 AXIS Machining Centres
    • AXseries

      The AX 5 Axis Machining Centre have a traditional trunnion style rotary table with 4 different sizes available within the range. The AX range comes with quality, accuracy and reliability as standard.

      The AX range is equipped with hollow ball screws incorporating through ball screw cooling to ensure accuracy and repeatability on machining cycles. The range also benefits from an innovative pneumatic counter balance system that is designed reduce vibration in the Z axis movement, resulting in high surface finishes.

      As with all Pinnacle machines the AX 5 Axis machining centre is designed with oversized castings, ball screws and guideways to ensure the rigidity of the machine, as a result you can expect a Pinnacle machine to provide exceptional accuracy and reliability for many years.

      The Spindle is available in a number of configurations allowing the user to specify a variant which is best suited to their particular machining application. Options include both built in spindle and direct drive with speeds ranging between 10,000 Rpm and 24,000 Rpm. The spindle is available as BT40 or HSK63.

      All of the spindles are equipped with spindle oil coolers to help them perform at their best and maintain accuracy regardless of the machining cycle.

      The range is available with a choice of different sized tool magazines ranging from 24 tools up to 40 tools.


    • BXseries

      5-AXIS Machining Center



  • 3HP variable speed head.
  • NT30# / R8 spindle taper.
  • 3HP powerful motor.
  • Square slideways on knee.
  • Extra wide table working area 50″ x 10″.
  • Hardened and ground X,Y axes and table surface.
Table 1270 x 254mm
T-Slot (width x number x distance) 16 x 3 x 63.5
Rapid Feed Rate 890 mm/min
Longitudinal 800 mm
Cross 380 mm
Vertical 380 mm
Spindle Travel 127 mm
Arm Travel 520 mm
Taper R8 or NT30#
Spindle Nose to Table Surface 80-460 mm
Spindle Center to Column 140-660 mm
Variable Speed 75-3800 R.P.M.
Quill Feeds Rer. Rev. of Spindle 0.04 – 0.08 – 0.15 mm
Dia. of Quill Ø 86
Main Motor 2.2 KW 3PH or 3.7 KW 3PH
Swivel Angle to Right & Left 90°
Swivel Angle to Front & Back 45°
Approximate Net Weight 1350 Kgs
  • Cooling pump system
  • Auto lubrication system
  • Way chip protectors
  • Chip tray
  • Tool box with tools
  • Halogen worklight
  • Electric control cabinet with operation panel
  • Mitsubishi M80
  • FAGOR 8055iFL
  • SIEMENS 828D